Recent disruptions to two undersea internet cables in the Baltic Sea have yet again...
4.19 SNMP Host
4.19.1 snmp.X.auth_password #
User’s password used to authenticate SNMP communications. Applicable only when SNMP v3 with authentication is used. Refer to snmp.X.version, snmp.X.seclevel, snmp.X.auth_username.
- Possible values:
text
4.19.2 snmp.X.auth_protocol #
SNMP authentication protocol. Applicable only when SNMP v3 with authentication is used. Refer to snmp.X.version, snmp.X.seclevel.
0 – MD5
1 – SHA
- Possible values:
0, 1
4.19.3 snmp.X.auth_username #
SNMP user name. Applicable only when SNMP v3 with authentication is used. Refer to snmp.X.version, snmp.X.seclevel.
- Possible values:
text
4.19.4 snmp.X.community #
Mandatory parameterDefines the SNMP community.
- Possible values: textual community name
4.19.5 snmp.X.context #
Defines the SNMPv3 context name.
- Possible values: textual context name
4.19.6 snmp.X.ip #
Defines IPv4/IPv6 address of the SNMP host.
Hostnames are not supported.- Possible values: valid IPv4 or IPv6 address
4.19.7 snmp.X.name #
Sets a shortname for SNMP host.
- Possible values: text
4.19.8 snmp.X.oids_per_pdu #
Defines the maximum number of OIDs that can be requested in a single PDU. Refer bgpd.snmp.packets_interval.
- Possible values:
1-300 - Default value:
10
4.19.9 snmp.X.port #
Defines the UDP port to send SNMP requests.
- Possible values:
1-65535 - Default value:
161
4.19.10 snmp.X.priv_password #
Password used to encrypt SNMP communications. Applicable only when SNMP v3 with privacy is used. Refer to snmp.X.version, snmp.X.seclevel.
- Possible values:
text
4.19.11 snmp.X.priv_protocol #
SNMP encryption protocol. Applicable only when SNMP v3 with privacy is used. Refer to snmp.X.version, snmp.X.seclevel.
DES isn’t supported in RedHat Enterprise Linux 90 – DES
1 – AES
- Possible values:
0, 1
4.19.12 snmp.X.seclevel #
SNMP security services. IRP supports either No security, Authentication only or both Authentication and Privacy. Applicable only when SNMP v3 is used (snmp.X.version). Depending on security services used further parameters should be configured, for example: snmp.X.auth_username, snmp.X.auth_password, snmp.X.auth_protocol, snmp.X.priv_password, snmp.X.priv_protocol.
0 – None – neither Authentication nor Privacy is used
1 – Authentication only
2 – Authentication and Privacy
- Possible values:
0, 1, 2 - Default value:
0
4.19.13 snmp.X.timeout #
Timeout period before retrying an SNMP request (s).
- Possible values:
1-5 - Default value:
1
4.19.14 snmp.X.version #
SNMP version used by host.
2 – SNMP v2c
3 – SNMP v3
- Possible values:
2, 3 - Default value:
2